No abstract

2,5-Furandicarboxylic acid (FDCA) is an important renewable biotechnological building block because it serves as an environmentally friendly substitute for terephthalic acid in the production of polyesters. Currently, FDCA is produced mainly via chemical oxidation, which can cause severe environmental pollution. In this study, we developed an environmentally friendly process for the production of FDCA from 5-hydroxymethyl furfural (5-HMF) using a newly isolated strain, Raoultella ornithinolytica BF60. First, R. ornithinolytica BF60 was identified by screening and was isolated. Its maximal FDCA titer was 7.9 g/liter, and the maximal molar conversion ratio of 5-HMF to FDCA was 51.0% (mol/mol) under optimal conditions (100 mM 5-HMF, 45 g/liter whole-cell biocatalyst, 30°C, and 50 mM phosphate buffer [pH 8.0]). Next, dcaD, encoding dicarboxylic acid decarboxylase, was mutated to block FDCA degradation to furoic acid, thus increasing FDCA production to 9.2 g/liter. Subsequently, aldR, encoding aldehyde reductase, was mutated to prevent the catabolism of 5-HMF to HMF alcohol, further increasing the FDCA titer, to 11.3 g/liter. Finally, the gene encoding aldehyde dehydrogenase 1 was overexpressed. The FDCA titer increased to 13.9 g/liter, 1.7 times that of the wild-type strain, and the molar conversion ratio increased to 89.0%.IMPORTANCE In this work, we developed an ecofriendly bioprocess for green production of FDCA in engineered R. ornithinolytica. This report provides a starting point for further metabolic engineering aimed at a process for industrial production of FDCA using R. ornithinolytica.

The compound 5-hydroxymethylfurfural (HMF) has attracted much attention due to its versatility as an important bio-based platform chemical. Here, we engineered Raoultella ornithinolytica BF60 as a whole-cell biocatalyst for a highly efficient synthesis of 2,5-furandicarboxylic acid (FDCA) from HMF. Specifically, various expression cassettes of key genes, such as hmfH (gene encoding HMF/furfural oxidoreductase [HmfH]) and hmfo (gene encoding HMF oxidase), were designed and constructed for fine-tuning FDCA synthesis from HMF. The FDCA titer reached 108.9 mM with a yield of 73% when 150 mM HMF was used as the substrate. This yield was 16% higher than that without balancing key gene expression in FDCA synthetic pathways. Additionally, to strengthen HmfH expression at the translational level, ribosomal binding site (RBS) sequences, which were computationally designed using the RBS calculator, were assembled into HmfH expression cassettes. The HmfH expression in the presence of these sequences enhanced FDCA titer to 139.6 mM with a yield of 93%. Next, previously unknown candidate genes, such as aldR, dkgA, akR, AdhP1, and AdhP2, which encode enzymes that catalyze the reactions leading to the formation of the undesired product 2,5-bis(hydroxymethyl)furan (HMF alcohol) from HMF, were identified by RNA-sequencing-based transcriptomics. Combinatorial deletion of these five candidate genes led to an 88% reduction in HMF alcohol formation and 12% enhancement in FDCA production (175.6 mM). Finally, FDCA synthesis was further improved by the substrate pulse-feeding strategy, and 221.5 mM FDCA with an 88.6% yield was obtained. The combinatorial synthetic pathway fine-tuning and comparative transcriptomics approach may be useful for improving the biocatalysis efficiency of other industrially useful compounds.

No abstract

Bacillus subtilis is a widely distributed aerobic Gram-positive species of bacteria. As a tool in the lab, it has the advantages of nonpathogenicity and limited likelihood of becoming drug resistant. It is a probiotic strain that can be directly used in humans and animals. It can be induced to produce spores under nutrient deficiency or other adverse conditions. B. subtilis spores have unique physical, chemical, and biochemical characteristics. Expression of heterologous antigens or proteins on the surface of B. subtilis spores has been successfully performed for over a decade. As an update and supplement to previously published research, this paper reviews the latest research on spore surface display technology using B. subtilis. We have mainly focused on the regulation of spore coat protein expression, display and application of exogenous proteins, and identification of developing research areas of spore surface display technology.

10‐Hydroxy‐2‐decenoic acid (10‐HDA) is a terminal hydroxylated medium‐chain α,β‐unsaturated carboxylic acid that performs various unique physiological activities and has a wide market value. Therefore, development of an environmentally friendly, safe, and high‐efficiency route to synthesize 10‐HDA is required. Here, the β‐oxidation pathway of Escherichia coli was modified and a P450 terminal hydroxylase (CYP153A33‐CPRBM3) was rationally designed to synthesize 10‐HDA using decanoic acid as a substrate via two‐step whole‐cell catalysis. Different homologues of FadDs, FadEs, and YdiIs were analyzed in the first step of the conversion of decanoic acid to trans‐ ‐2‐ decenoic acid. In the second step, CYP153A33 (M228L)‐CPRBM3 efficiently catalyzed the conversion of trans‐ ‐2‐ decenoic acid to 10‐HDA. Finally, 217 mg L−1 10‐HDA was obtained with 500 mg L−1 decanoic acid. This study provides a strategy for biosynthesis of 10‐HDA and other α, β‐unsaturated carboxylic acid derivatives from specific fatty acids.

No abstract

Converting biomass into high value-added compounds has attracted great attention for solving fossil fuel consumption and global warming. 5-Hydroxymethylfurfural (HMF) has been considered as a versatile biomass-derived building block that can be used to synthesize a variety of sustainable fuels and chemicals. Among these derivatives, 2,5-furandicarboxylic acid (FDCA) is a desirable alternative to petroleum-derived terephthalic acid for the synthesis of biodegradable polyesters. Herein, to fully understand the current development of the catalytic conversion of biomass to FDCA, a comprehensive review of the catalytic conversion of cellulose biomass to HMF and the oxidation of HMF to FDCA is presented. Moreover, future research directions and general trends of using biomass for FDCA production are also proposed.