[1] An aerosol component of a new multiangle implementation of atmospheric correction (MAIAC) algorithm is presented. MAIAC is a generic algorithm developed for the Moderate Resolution Imaging Spectroradiometer (MODIS), which performs aerosol retrievals and atmospheric correction over both dark vegetated surfaces and bright deserts based on a time series analysis and image-based processing. The MAIAC look-up tables explicitly include surface bidirectional reflectance. The aerosol algorithm derives the spectral regression coefficient (SRC) relating surface bidirectional reflectance in the blue (0.47 mm) and shortwave infrared (2.1 mm) bands; this quantity is prescribed in the MODIS operational Dark Target algorithm based on a parameterized formula. The MAIAC aerosol products include aerosol optical thickness and a fine-mode fraction at resolution of 1 km. This high resolution, required in many applications such as air quality, brings new information about aerosol sources and, potentially, their strength. AERONET validation shows that the MAIAC and MOD04 algorithms have similar accuracy over dark and vegetated surfaces and that MAIAC generally improves accuracy over brighter surfaces due to the SRC retrieval and explicit bidirectional reflectance factor characterization, as demonstrated for several U.S. West Coast AERONET sites. Due to its generic nature and developed angular correction, MAIAC performs aerosol retrievals over bright deserts, as demonstrated for the Solar Village Aerosol Robotic Network (AERONET) site in Saudi Arabia.

No abstract

In support of the World Climate Research Program GEWEX Continental‐Scale International Project (GCIP) and the GEWEX Americas Prediction Project (GAPP), real‐time estimates of shortwave radiative fluxes, both at the surface and at the top of the atmosphere, are being produced operationally by the National Oceanic and Atmospheric Administration (NOAA)/National Environmental Satellite Data and Information Service using observations from GOES images. The inference scheme has been developed at the Department of Meteorology, University of Maryland, and the atmospheric and surface model input parameters are produced and provided by the NOAA/National Centers for Environmental Prediction. The radiative fluxes are being evaluated on hourly, daily, and monthly timescales using observations at about 50 stations. The satellite estimates have been found to be within acceptable limits during snow‐free periods, but the difficulty in detecting clouds over snow affects the accuracy during the winter season. In what follows, this activity is discussed, and evaluation results of the derived fluxes against ground observations for time periods of 1–2 years are presented.

Abstract. As a result of increasing attention paid to aerosols in climate studies, numerous global satellite aerosol products have been generated. Aerosol parameters and underlining physical processes are now incorporated in many general circulation models (GCMs) in order to account for their direct and indirect effects on the earth's climate, through their interactions with the energy and water cycles. There exists, however, an outstanding problem that these satellite products have substantial discrepancies, that must be lowered substantially for narrowing the range of the estimates of aerosol's climate effects. In this paper, numerous key uncertain factors in the retrieval of aerosol optical depth (AOD) are articulated for some widely used and relatively long satellite aerosol products including the AVHRR, TOMS, MODIS, MISR, and SeaWiFS. We systematically review the algorithms developed for these sensors in terms of four key elements that influence the quality of passive satellite aerosol retrieval: calibration, cloud screening, classification of aerosol types, and surface effects. To gain further insights into these uncertain factors, the NOAA AVHRR data are employed to conduct various tests, which help estimate the ranges of uncertainties incurred by each of the factors. At the end, recommendations are made to cope with these issues and to produce a consistent and unified aerosol database of high quality for both environment monitoring and climate studies.

No abstract

The Visible Infrared Imaging Radiometer Suite (VIIRS) instrument on board the Suomi National Polar‐orbiting Partnership (S‐NPP) spacecraft was launched in October 2011. The instrument has 22 spectral channels with band centers from 412 nm to 12,050 nm. The VIIRS aerosol data products are derived primarily from the radiometric channels covering the visible through the short‐wave infrared spectral regions (412 nm to 2250 nm). The major components of the VIIRS aerosol retrieval process are data screening, land inversion, ocean inversion, suspended matter typing, and aggregation. The primary data product produced is the aerosol optical thickness (AOT) environmental data record. A higher resolution AOT intermediate product is also produced. These AOT products and their corresponding retrieval algorithms are described in detail, including theoretical basis, retrieval limitations, and data quality flagging. Preliminary evaluation of the data products has been undertaken by the VIIRS aerosol calibration/validation team using Aerosol Robotic Network ground‐based observations to show that the performance of AOT retrievals meets the requirements specified in the Joint Polar Satellite System Level 1 requirements.

[1] This paper describes a radiative transfer basis of the algorithm MAIAC which performs simultaneous retrievals of atmospheric aerosol and bidirectional surface reflectance from the Moderate Resolution Imaging Spectroradiometer (MODIS). The retrievals are based on an accurate semianalytical solution for the top-of-atmosphere reflectance expressed as an explicit function of three parameters of the Ross-Thick Li-Sparse model of surface bidirectional reflectance. This solution depends on certain functions of atmospheric properties and geometry which are precomputed in the look-up table (LUT). This paper further considers correction of the LUT functions for variations of surface pressure/height and of atmospheric water vapor, which is a common task in the operational remote sensing. It introduces a new analytical method for the water vapor correction of the multiple-scattering path radiance. It also summarizes the few basic principles that provide a high efficiency and accuracy of the LUT-based radiative transfer for the aerosol/surface retrievals and optimize the size of LUT. For example, the single-scattering path radiance is calculated analytically for a given surface pressure and atmospheric water vapor. The same is true for the direct surface-reflected radiance, which along with the single-scattering path radiance largely defines the angular dependence of measurements. For these calculations, the aerosol phase functions and kernels of the surface bidirectional reflectance model are precalculated at a high angular resolution. The other radiative transfer functions depend rather smoothly on angles because of multiple scattering and can be calculated at coarser angular resolution to reduce the LUT size. At the same time, this resolution should be high enough to use the nearest neighbor geometry angles to avoid costly three-dimensional interpolation. The pressure correction is implemented via linear interpolation between two LUTs computed for the standard and reduced pressure levels. A linear mixture and a modified linear mixture methods are used to represent different aerosol types in the aerosol/surface retrievals from several base models of the fine and coarse aerosol fractions. In summary, the developed LUT algorithm allows fast high-accuracy simulations of the outgoing radiance with full variability of the atmospheric and surface bidirectional reflectance properties for the aerosol/surface remote sensing.

No abstract